Search
Search Criteria
Products meeting the search criteria
The Dragino LLDS12 is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
The LLDS12 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LLDS12 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LLDS12 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LLDS12 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- Laser technology for distance detection
- Operating Range : 0.1m~12m①
- Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
- FOV : 3.6°
- Monitor Battery Level
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- AT Commands to change parameters
- Uplink on periodically
- Downlink to change configure
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Documents
Package Includes:
- 1 x LLDS12
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
LLDS12-XXX
XXX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
Prices are exclusive of local taxes and import duties
The Dragino LDS12-LB is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! The LiDAR probe uses laser induction technology for distance measurement.
The LDS12-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LDS12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LDS12-LB supports BLE configure and wireless OTA update which make user easy to use.
LDS12-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LDS12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~12m @ 90% Reflectivity
- Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
- FOV : 3.6°
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-20℃~75℃
- Operating temperature : -20℃~60℃
- Measure Distance:
- 0.1m ~ 12m @ 90% Reflectivity
- 0.1m ~ 4m @ 10% Reflectivity
- Accuracy : ±5cm@(0.1-6m), ±1%@(6m-12m)
- Distance resolution : 5mm
- Ambient light immunity : 70klux
- Enclosure rating : IP65
- Light source : LED
- Central wavelength : 850nm
- FOV : 3.6°
- Material of enclosure : ABS+PC
- Wire length : 25cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS12-LB LoRaWAN LiDAR Distance Sensor x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Order Info:
Model: LDS12-LB-XXX
XXX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
Shipping Notice
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino LDS12-LS is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
The LDS12-LS can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LDS12-LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LDS12-LS supports BLE configure and wireless OTA update which make user easy to use.
LDS12-LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery , it is designed for long term use up to 5 years.
Each LDS12-LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~12m
- Accuracy : ±5cm@(0.1-5m), ±1%@(5m-12m)
- FOV : 3.6°
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- Solar panel + 3000mAh Li-ion battery (LDS12-LS)
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-20℃~75℃
- Operating temperature : -20℃~60℃
- Measure Distance:
- 0.1m ~ 12m @ 90% Reflectivity
- 0.1m ~ 4m @ 10% Reflectivity
- Accuracy : ±5cm@(0.1-5m), ±1%@(5m-12m)
- Distance resolution : 1cm
- Ambient light immunity : 70klux
- Enclosure rating : IP65
- Light source : LED
- Central wavelength : 850nm
- FOV : 3.6°
- Material of enclosure : ABS+PC
- Wire length : 25cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS12-LS LoRaWAN LiDAR Distance Sensor x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Part Number: LDS12-LS-XX
XX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
The Dragino LDS12-NB is a NB-IoT LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable to measure the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)!. The LiDAR probe uses laser induction technology for distance measurement.
The LDS12-NB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to NB-IoT IoT Server.
LDS12-NB supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirement, and support uplinks to various IoT Servers.
LDS12-NB supports BLE configure and OTA update which make user easy to use.
LDS12-NB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
LDS12-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
Features:
- NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~12m
- Accuracy : ±5cm@(0.1-5m), ±1%@(5m-12m)
- Multiply Sampling and one uplink
- Support Bluetooth v5.1 remote configure and update firmware
- Uplink on periodically
- Downlink to change configure
- IP65 Waterproof Enclosure
- 8500mAh Battery for long term use
- Nano SIM card slot for NB-IoT SIM
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-20℃~75℃
- Operating temperature : -20℃~60℃
- Measure Distance:
- 0.1m ~ 12m @ 90% Reflectivity
- 0.1m ~ 4m @ 10% Reflectivity
- Accuracy : ±5cm@(0.1-5m), ±1%@(5m-12m)
- Distance resolution : 1cm
- Ambient light immunity : 70klux
- Enclosure rating : IP65
- Light source : LED
- Central wavelength : 850nm
- FOV : 3.6°
- Material of enclosure : ABS+PC
- Wire length : 25cm
NB-IoT Spec:
NB-IoT Module: BC660K-GL
Support Bands:
- B1 @H-FDD: 2100MHz
- B2 @H-FDD: 1900MHz
- B3 @H-FDD: 1800MHz
- B4 @H-FDD: 2100MHz
- B5 @H-FDD: 860MHz
- B8 @H-FDD: 900MHz
- B12 @H-FDD: 720MHz
- B13 @H-FDD: 740MHz
- B17 @H-FDD: 730MHz
- B18 @H-FDD: 870MHz
- B19 @H-FDD: 870MHz
- B20 @H-FDD: 790MHz
- B25 @H-FDD: 1900MHz
- B28 @H-FDD: 750MHz
- B66 @H-FDD: 2000MHz
- B70 @H-FDD: 2000MHz
- B85 @H-FDD: 700MHz
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- STOP Mode: 10uA @ 3.3v
- Max transmit power: 350mA@3.3v
Documents:
Package Includes:
- LDS12-NB_NB-IoT LiDAR Distance Sensor x 1
- External antenna x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Order Info:
Part Number: LDS12-NB-XX
XX:
- GE: General version ( Exclude SIM card)
- 1D: with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
1NCE SIM Card NB-IoT network coverage: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino LLDS40 is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 40m. The LiDAR probe uses laser induction technology for distance measurement.
The LLDS40 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LLDS40 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LLDS40 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LLDS40 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~40m @ 90% Reflectivity
- Accuracy : ±5cm@(0.1-5m), ±1%@(5m-40m)
- Monitor Battery Level
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- AT Commands to change parameters
- Uplink on periodically
- Downlink to change configure
- 8500mAh Battery for long-term use
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Probe Specification:
- Storage temperature: -30℃~80℃
- Operating temperature : -20℃~60℃
- Measure Distance:
- 0.1m ~ 40m @ 90% Reflectivity
- 0.1m ~ 13.5m @ 10% Reflectivity
- Distance resolution : 1cm
- Enclosure rating : IP65
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 75cm
- Accuracy: ±5cm@(0.1-5m), ±1%@(5m-40m)
- Ambient light immunity: 100klux
Package Includes:
- LLDS40 LoRaWAN LiDAR Distance Sensor x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Part Number:LLDS40-XXX
XXX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
Prices are exclusive of local taxes and import duties
The Dragino LDS40-LB is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 40m. The LiDAR probe uses laser induction technology for distance measurement.
The LDS40-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LDS40-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LDS40-LB supports BLE configure and wireless OTA update which make user easy to use.
LDS40-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LDS40-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~40m @ 90% Reflectivity
- FOV : 3°
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-30°C~80°C
- Operating temperature: -20°C~60°C
- Measure Distance:
- 0.1m ~ 40m @ 90% Reflectivity
- 0.1m ~ 13.5m @ 10% Reflectivity
- Distance resolution: 1cm
- Ambient light immunity: 100klux
- Enclosure rating : IP65
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 75cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS40-LB LoRaWAN LiDAR Distance Sensor x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Order Info:
Model: LDS40-LB-XXX
XXX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
Shipping Notice
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino LDS40-LS is a LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 40m. The LiDAR probe uses laser induction technology for distance measurement.
The LDS40-LS can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LDS40-LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LDS40-LS supports BLE configure and wireless OTA update which make user easy to use.
LDS40-LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery, it is designed for long term use up to 5 years.
Each LDS40-LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~40m @ 90% Reflectivity
- FOV : 3°
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- Solar panel + 3000mAh Li-ion battery (LDS40-LS)
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-30°C~80°C
- Operating temperature: -20°C~60°C
- Measure Distance:
- 0.1m ~ 40m @ 90% Reflectivity
- 0.1m ~ 13.5m @ 10% Reflectivity
- Distance resolution: 1cm
- Ambient light immunity: 100klux
- Enclosure rating : IP65
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 75cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS40-LS LoRaWAN LiDAR Distance Sensor x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Part Number: LDS40-LS-XX
XX: the default frequency band
- EU433: Default frequency band EU433
- CN470: Default frequency band CN470
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
The Dragino LDS40-NB is a NB-IoT LiDAR ToF (Time of Flight) Distance Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 40m. The LiDAR probe uses laser induction technology for distance measurement.
The LDS40-NB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to NB-IoT IoT Server.
LDS40-NB supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirement, and support uplinks to various IoT Servers.
LDS40-NB supports BLE configure and OTA update which make user easy to use.
LDS40-NB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
LDS40-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
Features:
- NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m ~ 40m @ 90% Reflectivity; 0.1m ~ 13.5m @ 10% Reflectivity
- Distance resolution: 1cm
- Multiply Sampling and one uplink
- Support Bluetooth v5.1 remote configure and update firmware
- Uplink on periodically
- Downlink to change configure
- IP65 Waterproof Enclosure
- 8500mAh Battery for long term use
- Nano SIM card slot for NB-IoT SIM
Applications:
- Horizontal distance measurement
- Parking management syste
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
Specification:
Common DC Characteristics:
- Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-30°C~80°C
- Operating temperature: -20°C~60°C
- Measure Distance:
- 0.1m ~ 40m @ 90% Reflectivity
- 0.1m ~ 13.5m @ 10% Reflectivity
- Distance resolution: 1cm
- Ambient light immunity: 100klux
- Enclosure rating : IP65
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 75cm
NB-IoT Spec:
NB-IoT Module: BC660K-GL
Support Bands:
- B1 @H-FDD: 2100MHz
- B2 @H-FDD: 1900MHz
- B3 @H-FDD: 1800MHz
- B4 @H-FDD: 2100MHz
- B5 @H-FDD: 860MHz
- B8 @H-FDD: 900MHz
- B12 @H-FDD: 720MHz
- B13 @H-FDD: 740MHz
- B17 @H-FDD: 730MHz
- B18 @H-FDD: 870MHz
- B19 @H-FDD: 870MHz
- B20 @H-FDD: 790MHz
- B25 @H-FDD: 1900MHz
- B28 @H-FDD: 750MHz
- B66 @H-FDD: 2000MHz
- B70 @H-FDD: 2000MHz
- B85 @H-FDD: 700MHz
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- STOP Mode: 10uA @ 3.3v
- Max transmit power: 350mA@3.3v
Documents:
Package Includes:
- LDS40-NB_NB-IoT LiDAR Distance Sensor x 1
- External antenna x 1
Dimensions and Weight:
- Package Dimension: 150*120*55mm
- Weight : 220g
Order Info:
Part Number: LDS40-NB-XX
XX:
- GE: General version ( Exclude SIM card)
- 1D: with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
1NCE SIM Card NB-IoT network coverage: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino LDS25-LB is a LiDAR ToF (Time of Flight) Distance Auto-Clean Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 25m. The LiDAR probe uses laser induction technology for distance measurement.
It has a unique dust removal brush structure built in, and the radar drives the dust removal brush to complete the optical mirror dust removal operation, and the user can customize the dust removal confguration.
The Dragino LDS25-LB can be applied to scenarios such as horizontal distance measurement, Ore Material Monitoring, object proximity and presence detection, Industrial Material Monitoring, Feed Crop Monitoring, automatic control,etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN Server.
It supports BLE confgure and wireless OTA update which make user easy to use.
The Dragino LDS25-LB is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery, it is designed for long-term use up to several years.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~25m @ 90% Reflectivity, 0.1m~12m @ 10% Reflectivity
- Accuracy : ±6cm@(0.1m-6m), ±1%@(6m-25m)
- Resolution: 1cm
- FOV : 3°
- Protection level: IP5X
- Ambient light immunity : 100Klux
- Monitor Battery Level
- Support Bluetooth v5.1 remote configure and OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- 8500mAh Li/SOCl2 Battery (LDS25-LB)
Applications:
- Horizontal distance measurement
- Ore Material Monitoring
- Object proximity and presence detection
- Industrial Material Monitoring
- Feed Crop Monitoring
- Automatic control
Specification:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-30°C~80°C
- Operating temperature: -20°C~60°C
- Measure Distance:
- 0.1m ~ 25m @ 90% Reflectivity
- 0.1m ~ 12m @ 10% Reflectivity
- Accuracy: ±6cm @（0.1m~6m），±1% @（6m~25m）
- Distance resolution: 1cm
- Ambient light immunity: 100klux
- Enclosure rating : IP5X
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 120cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS25-LB LoRaWAN LiDAR Distance Auto-Clean Sensor x 1
Dimensions and Weight:
- Package Dimension: mm
- Weight : g
The Dragino LDS25-LS is a LiDAR ToF (Time of Flight) Distance Auto-Clean Sensor for Internet of Things solution. It is capable of measuring the distance to objects as close as 0m to 25m. The LiDAR probe uses laser induction technology for distance measurement.
It has a unique dust removal brush structure built in, and the radar drives the dust removal brush to complete the optical mirror dust removal operation, and the user can customize the dust removal confguration.
The Dragino LDS25-LS can be applied to scenarios such as horizontal distance measurement, Ore Material Monitoring, object proximity and presence detection, Industrial Material Monitoring, Feed Crop Monitoring, automatic control,etc.
It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN Server.
It supports BLE confgure and wireless OTA update which make user easy to use.
The Dragino LDS25-LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery, it is designed for long-term use up to several years.
Features:
- LoRaWAN 1.0.3 Class A
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Ultra-low power consumption
- Laser technology for distance detection
- Measure Distance: 0.1m~25m @ 90% Reflectivity, 0.1m~12m @ 10% Reflectivity
- Accuracy : ±6cm@(0.1m-6m), ±1%@(6m-25m)
- Resolution: 1cm
- FOV : 3°
- Protection level: IP5X
- Ambient light immunity : 100Klux
- Monitor Battery Level
- Support Bluetooth v5.1 remote configure and OTA update firmware
- AT Commands to change parameters
- Downlink to change configure
- Solar panel + 3000mAh Li-ion battery
Applications:
- Horizontal distance measurement
- Ore Material Monitoring
- Object proximity and presence detection
- Industrial Material Monitoring
- Feed Crop Monitoring
- Automatic control
Specification:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Probe Specification:
- Storage temperature：-30°C~80°C
- Operating temperature: -20°C~60°C
- Measure Distance:
- 0.1m ~ 25m @ 90% Reflectivity
- 0.1m ~ 12m @ 10% Reflectivity
- Accuracy: ±6cm @（0.1m~6m），±1% @（6m~25m）
- Distance resolution: 1cm
- Ambient light immunity: 100klux
- Enclosure rating : IP5X
- Light source : VCSEL
- Central wavelength : 850nm
- FOV : 3°
- Material of enclosure : ABS+PC
- Wire length : 120cm
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- LDS25-LS LoRaWAN LiDAR Distance Auto-Clean Sensor x 1
Dimensions and Weight:
- Package Dimension: mm
- Weight : g
The Dragino LMDS200 is a LoRaWAN Microwave Radar distance sensor. It uses 24Ghz Microwave to detect the distance between the sensor and different objects. Compare vs the ultrasonic or Lidar measurement method, Microwave Radar is more reliable for condensation / dusty environments. It can sense the correct distance even there is water or thick dust on top of the sensor.
The LMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
LMDS200 can measure two distances: the closest object and the next object behind the closest one.
LMDS200 supports the Alarm Feature, the user can set the LMDS200 to uplink data in a short interval when the distance is out of configured range.
The LoRa wireless technology used in LMDS200 allows devices to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LMDS200 is powered by an 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LMDS200 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Prices are exclusive of local taxes and import duties
The Dragino MDS200-LB is a LoRaWAN Microwave Radar distance sensor. It uses 24Ghz Microwave to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or thick dust on top of the sensor.
The MDS200-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
MDS200-LB can measure two distances: the closest object and next object behind the closest one.
MDS200-LB supports Alarm Feature, user can set the MDS200-LB to uplink data in a short interval when the distance is out of configured range.
The LoRa wireless technology used in MDS200-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
MDS200-LB supports BLE configure and wireless OTA update which make user easy to use.
MDS200-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each MDS200-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- Microwave Radar for distance detection
- Measure Range : 0.5 ~ 20m
- Accuracy: ± 0.1m
- Resolution: 0.01m
- Measurement Angle : 78 degrees horizontal and 23 degrees vertical
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Uplink on periodically
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Liquid level measurement
- Parking management system
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
- Bottom water level monitoring
Specifications:
Common DC Characteristics:
- Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -20 ~ 85°C
Radar probe specification:
- Measuring Method: FMCW
- Frequency: 24.000~24.500 GHz
- Measurement output power: 6dBm
- Measure Range : 0.5 ~ 20m
- Accuracy: ± 0.1m
- Resolution: 0.01m
- Measurement Angle : 78 degrees horizontal and 23 degrees vertical
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- MDS200-LB LoRaWAN Microwave Radar Distance Sensor x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Order Info:
Model: MDS200-XXX
XXX: the default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470: LoRaWAN CN470 band
Shipping Notice
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino MDS200-LS is a LoRaWAN Microwave Radar distance sensor. It uses 24Ghz Microwave to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or thick dust on top of the sensor.
The MDS200-LS can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
MDS200-LS can measure two distances: the closest object and next object behind the closest one.
MDS200-LS supports Alarm Feature, user can set the MDS200-LS to uplink data in a short interval when the distance is out of configured range.
The LoRa wireless technology used in MDS200-LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
MDS200-LS supports BLE configure and wireless OTA update which make user easy to use.
MDS200-LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery , it is designed for long term use up to 5 years.
Each MDS200-LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- Microwave Radar for distance detection
- Measure Range : 0.5 ~ 20m
- Accuracy: ± 0.1m
- Resolution: 0.01m
- Measurement Angle : 78 degrees horizontal and 23 degrees vertical
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Uplink on periodically
- 8500mAh Li/SOCl2 Battery (MDS200-LB)
- Solar panel + 3000mAh Li-ion battery (MDS200-LS)
Applications:
- Horizontal distance measurement
- Liquid level measurement
- Parking management system
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
- Bottom water level monitoring
Specifications:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Radar probe specification:
- Measuring Method: FMCW
- Frequency: 24.000~24.500 GHz
- Measurement output power: 6dBm
- Measure Range : 0.5 ~ 20m
- Accuracy: ± 0.1m
- Resolution: 0.01m
- Measurement Angle : 78 degrees horizontal and 23 degrees vertical
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- MDS200-LS LoRaWAN Microwave Radar Distance Sensor x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Order Info:
Part Number: MDS200-LS-XX
XX: the default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470: LoRaWAN CN470 band
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino MDS200-NB is a NB-IoT Microwave Radar distance Sensor for Internet of Things solution. It uses 24Ghz Microwave Radar to detect the distance between sensor and different objects. Different from ultrosonic or Lidar measurement. Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or think dust on top of the sensor.
The MDS200-NB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
MDS200-NB supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirement, and support uplinks to various IoT Servers.
MDS200-NB supports BLE configure and OTA update which make user easy to use.
MDS200-NB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
MDS200-NB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.
Features:
- NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
- Ultra-low power consumption
- 2Ghz Microwave Radar for distance detection
- Measure Range: 0.5 ~ 20m
- Accuracy: ±0.1m
- Resolution: 0.01m
- Measurement Angle: 78 degrees horizontal and 23 degrees vertical
- Multiply Sampling and one uplink
- Support Bluetooth v5.1 remote configure and update firmware
- Uplink on periodically
- Downlink to change configure
- 8500mAh Battery for long term use
- Nano SIM card slot for NB-IoT SIM
Applications:
- Horizontal distance measurement
- Liquid level measurement
- Parking management system
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
- Bottom water level monitoring
Specifications:
Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Radar probe specification:
- Measuring Method: FMCW
- Frequency: 24.000~24.500 GHz
- Measurement output power: 6dBm
- Measure Range : 0.5 ~ 20m
- Accuracy: ±0.1m
- Resolution: 0.01m
- Measurement Angle : 78 degrees horizontal and 23 degrees vertical
LoRa Spec:
NB-IoT Module: BC660K-GL
Support Bands:
- B1 @H-FDD: 2100MHz
- B2 @H-FDD: 1900MHz
- B3 @H-FDD: 1800MHz
- B4 @H-FDD: 2100MHz
- B5 @H-FDD: 860MHz
- B8 @H-FDD: 900MHz
- B12 @H-FDD: 720MHz
- B13 @H-FDD: 740MHz
- B17 @H-FDD: 730MHz
- B18 @H-FDD: 870MHz
- B19 @H-FDD: 870MHz
- B20 @H-FDD: 790MHz
- B25 @H-FDD: 1900MHz
- B28 @H-FDD: 750MHz
- B66 @H-FDD: 2000MHz
- B70 @H-FDD: 2000MHz
- B85 @H-FDD: 700MHz
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- STOP Mode: 10uA @ 3.3v
- Max transmit power: 350mA@3.3v
Documents:
Package Includes:
- MDS200-NB NB-IoT Microwave Radar distance sensor x 1
- External antenna x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Order Info:
Part Number: MDS200-NB-XX
XX:
- GE: General version ( Exclude SIM card)
- 1D: with 1NCE* 10 years 500MB SIM card and Pre-configure to DataCake server
1NCE SIM Card NB-IoT network coverage: Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak, Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino LMDS120 is a LoRaWAN Microwave Radar distance sensor. It uses use Microwave Radar to detect the distance between sensor and different objects. Different from ultrosonic or Lidar measurement. Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or think dust on top of the sensor.
The LMDS120 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
The LoRa wireless technology used in LMDS120 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LMDS120 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LMDS120 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- 60Ghz Microwave Radar for distance detection
- Measure Range : 200mm ~ 12000mm
- Accuracy: ± (3mm + S*0.2%). S: Measure Value
- Measurement Angle : 25 degrees horizontal and 23 degrees vertical
- Monitor Battery Level
- AT Commands to change parameters
- Uplink on periodically
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Water Level detect
- Grain Level detect
- Oil level detect
Documents:
Package Includes:
- LMDS120 LoRaWAN Microwave Radar Distance Sensor x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Model: LMDS120-XXX
XXX: the default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470 : LoRaWAN CN470 频段
发货须知
- 由于包含电池，我们仅支持快递运输
- 价格不含当地税费和进口关税
The Dragino MDS120-LB is a LoRaWAN Microwave Radar distance sensor. It uses use Microwave Radar to detect the distance between sensor and different objects. Different from ultrosonic or Lidar measurement. Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or think dust on top of the sensor.
The MDS120-LB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
The LoRa wireless technology used in MDS120-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
MDS120-LB supports BLE configure and wireless OTA update which make user easy to use.
MDS120-LB is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each MDS120-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- 60Ghz Microwave Radar for distance detection
- Measure Range : 200mm ~ 12000mm
- Accuracy: ± (3mm + S*0.2%). S: Measure Value
- Measurement Angle : 25 degrees horizontal and 23 degrees vertical
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Uplink on periodically
- 8500mAh Battery for long term use
Applications:
- Horizontal distance measurement
- Liquid level measurement
- Parking management system
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
- Bottom water level monitoring
Specifications:
Common DC Characteristics:
- Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~ 3.6v
- Operating Temperature: -15 ~ 65°C
Radar probe specification:
- Measuring Method: FMCW
- Frequency: 60 GHz
- Measure Range : 200mm ~ 12000mm
- Accuracy: ± (3mm + S*0.2%). S: Measure Value
- Resolution: 0.01m
- Measurement Angle : 25 degrees horizontal and 23 degrees vertical
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- MDS120-LB LoRaWAN Microwave Radar Distance Sensor x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Order Info:
Model: MDS120-XXX
XXX: the default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470: LoRaWAN CN470 band
Shipping Notice
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino MDS120-LS is a LoRaWAN Microwave Radar distance sensor. It uses use Microwave Radar to detect the distance between sensor and different objects. Different from ultrosonic or Lidar measurement. Microwave Radar is more reliable for condensation / dusty environment. It can sense correct distance even there is water or think dust on top of the sensor.
The MDS120-LS can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
The LoRa wireless technology used in MDS120-LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
MDS120-LS supports BLE configure and wireless OTA update which make user easy to use.
MDS120-LS is powered by 8500mAh Li-SOCI2 battery or solar powered + Li-ion battery , it is designed for long term use up to 5 years.
Each MDS120-LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- 60Ghz Microwave Radar for distance detection
- Measure Range : 15 ~ 1200cm
- Accuracy: ±(2cm+SX0.3%). S: Measure Value
- Measurement Angle : 25 degrees horizontal and 23 degrees vertical
- Monitor Battery Level
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- AT Commands to change parameters
- Uplink on periodically
- Solar panel + 3000mAh Li-ion battery (MDS120-LS)
Applications:
- Horizontal distance measurement
- Liquid level measurement
- Parking management system
- Object proximity and presence detection
- Intelligent trash can management system
- Robot obstacle avoidance
- Automatic control
- Sewer
- Bottom water level monitoring
Specifications:
Common DC Characteristics:
- Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
Radar probe specification:
- Measuring Method: FMCW
- Frequency: 60 GHz
- Measure Range : 15 ~ 1200cm
- Accuracy: ±(2cm+SX0.3%). S: Measure Value
- Resolution: 1cm
- Measurement Angle : 25 degrees horizontal and 23 degrees vertical
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- MDS120-LS LoRaWAN Microwave Radar Distance Sensor x 1
Dimensions and Weight:
- Package Dimension:
- Weight :
Order Info:
Part Number: MDS120-LS-XX
XX: the default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470: LoRaWAN CN470 band
TrackerD is an Open Source LoRaWAN Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip.
In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
TrackerD is equipped with a 1000mAh Li-on rechargeable battery. Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
Features:
- LoRaWAN 1.0.3 Class A
- ESP32 PICO D4
- SX1276/78 Wireless Chip
- Arduino IDE Compatible
- Open source hardware / software
- Regular/ Real-time GPS,BLE,WIFI tracking
- Built-in3 axis accelerometer (LIS3DH)
- Humidity / temperature sensor : GXCAS Technology GXHT3X
- Motion sensing capability
- Power Monitoring
- Charging circuit via USB port
- 1000mA Li-on Battery power
- Tri-color LED, Alarm button
- Datalog
Applications:
- Logistics and Supply Chain Management
- Human tracking
Specifications:
Micro Controller:
- Espressif ESP32 PICO D4
- MCU: ESP32 PICO D4
- Bluetooth: Bluetooth V4.2 BR/EDR and Bluetooth LE
- WiFi : 802.11 b/g/n (802.11n up to 150 Mbps)
- Integrated SPI flash : 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock Speed: 32Mhz
Common DC Characteristics:
- Supply Voltage: 5V via USB port or Internal li-on battery
- Operating Temperature: -40 ~ 60°C
LoRa Spec:
- Frequency Range, 168 dB maximum link budget.+20 dBm - 100 mW constant RF output vs.
- Band 1 (HF): 862 ~ 1020 Mhz
- +14 dBm high efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- LoRaWAN 1.0.3 Specification
- Frequency Range, 168 dB maximum link budget.+20 dBm - 100 mW constant RF output vs.
Battery:
- 1000mA Li-on Battery power (for model TrackerD)
Power Consumption:
- Sleeping Mode: 200uA
- LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
- Tracking: max: 38mA
Package Includes:
- TrackerD LoRaWAN GPS/BLE Tracker x 1
- USB recharge & program cable x 1
Dimensions and Weight:
- Device Size: 85 x 48 x 15 mm/pcs
- Weight: 55g/pcs
TrackerD-XXX:
XXX: the default frequency band
- EU433: Default frequency band EU433
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
Prices do not include local taxes and import duties
TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip. It can get the location data via GPS and set it to IoT server via LoRaWAN network.
TrackerD-LS supports Motion Detection, when there is motion, TrackerD-LS can send data more frequently and it will save power when no motion is detected.
The LoRa wireless technology used in TrackerD-LS allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
When there is no LoRaWAN network, TrackerD-LS can save the location data. It will send these data to IoT server when there is LoRaWAN network coverage.
TrackerD-LS is equipped with a 3000mAh Li-on rechargeable battery + Solar Panel which let the device can be used for many years. Each TrackerD-LS has a worldwide unique OTAA keys to join the LoRaWAN network.
TrackerD-LS is program friendly. Developers can use Arduino IDE to customize the software of TrackerD-LS to fit their IoT solution.
Features:
- LoRaWAN 1.0.3 Class A
- ESP32 PICO D4
- SX1276/78 Wireless Chip
- Arduino IDE Compatible
- Open source hardware / software
- Regular/ Real-time GPS tracking
- Built-in3 axis accelerometer.
- Motion sensing capability
- Power Monitoring
- Charging circuit via USB port
- 3000mA Rechargeable Li-on Battery + Solar Panel
- Datalog
Applications:
- Logistics and Supply Chain Management
Specifications:
Micro Controller:
- Espressif ESP32 PICO D4
- MCU: ESP32 PICO D4
- Integrated SPI flash : 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock Speed: 32Mhz
Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 60°C
LoRa Spec:
- Frequency Range, 168 dB maximum link budget.+20 dBm - 100 mW constant RF output vs.
- Band 1 (HF): 862 ~ 1020 Mhz
- +14 dBm high efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- LoRaWAN 1.0.3 Specification
Battery:
- 3000mA Li-on Battery power
- Built-in Solar Panel
Power Consumption:
- Sleeping Mode: 60uA
- LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
- Tracking: max: 38mA
Documents:
Order Info:
Part Number: TrackerD-LS-XXX
XXX: the default frequency band
- EU433: Default frequency band EU433
- EU868: Default frequency band EU868
- IN865: Default frequency band IN865
- KR920: Default frequency band KR920
- AS923: Default frequency band AS923
- AU915: Default frequency band AU915
- US915: Default frequency band US915
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties
The Dragino PS-LB-NA is a LoRaWAN Analog Sensor for Internet of Things solution. PS-LB-NA has 5v and 12v output , 4~20mA, 0~30v input interface to power and get value from Analog Sensor. PS-LB-NA will convert the Analog Value to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway.
The LoRa wireless technology used in PS-LB-NA allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
PS-LB-NA supports BLE configure and wireless OTA update which make user easy to use.
PS-LB-NA is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each PS-LB-NA is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
Features:
- LoRaWAN 1.0.3 Class A
- Ultra-low power consumption
- 1 x 0~20mA input , 1 x 0~30v input
- 5v and 12v output to power external sensor
- Monitor Battery Level
- Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
- Support Bluetooth v5.1 and LoRaWAN remote configure
- Support wireless OTA update firmware
- Uplink on periodically
- Downlink to change configure
- 8500mAh Battery for long term use
Specifications:
Micro Controller:
- MCU: 48Mhz ARM
- Flash: 256KB
- RAM: 64KB
Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 85°C
LoRa Spec:
- Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
- Max +22 dBm constant RF output vs.
- RX sensitivity: down to -139 dBm.
- Excellent blocking immunity
Current Input (DC) Measuring :
- Range: 0 ~ 20mA
- Accuracy: 0.02mA
- Resolution: 0.001mA
Voltage Input Measuring:
- Range: 0 ~ 30v
- Accuracy: 0.02v
- Resolution: 0.001v
Battery:
- Li/SOCI2 un-chargeable battery
- Capacity: 8500mAh
- Self-Discharge: <1% / Year @ 25°C
- Max continuously current: 130mA
- Max boost current: 2A, 1 second
Power Consumption:
- Sleep Mode: 5uA @ 3.3v
- LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Documents:
Package Includes:
- PS-LB-NA LoRaWAN Analog Sensor x 1
Dimensions and Weight:
- Device Size: cm
- Device Weight: g
- Package Size / pcs : cm
- Weight / pcs : g
Order Info:
Part Number: PS-LB-NA-XX-YY
XX: The default frequency band
- AS923: LoRaWAN AS923 band
- AU915: LoRaWAN AU915 band
- EU433: LoRaWAN EU433 band
- EU868: LoRaWAN EU868 band
- KR920: LoRaWAN KR920 band
- US915: LoRaWAN US915 band
- IN865: LoRaWAN IN865 band
- CN470: LoRaWAN CN470 band
YY: The grand connector hole size
- M12: M12 hole
- M16: M16 hole
- M20: M20 hole
###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties