Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
SE0X-LB -- LoRaWAN Soil Moisture & EC Sensor Transmitter
View Write Review
$55.00
SN50v3-LB -- Waterproof Long Range Wireless LoRa Sensor Node
View Write Review
$46.00
SN50v3-LS -- Waterproof Long Range Wireless LoRa Sensor Node
View Write Review
$52.00
SE0X-LB -- LoRaWAN Soil Moisture & EC Sensor Transmitter (SE0X-LB)

The Dragino SE0X-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture which can equipped with 4 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.

The LoRa wireless technology used in SE0X-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

SE0X-LB supports BLE configure and wireless OTA update which make user easy to use.

SE0X-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

Each SE0X-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

Features:

  • LoRaWAN 1.0.3 Class A
  • Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
  • Ultra-low power consumption
  • External 4 × sensor probes, probe length: 2.5m
  • Monitor Soil Moisture
  • Monitor Soil Temperature
  • Monitor Soil Conductivity
  • Support Bluetooth v5.1 and LoRaWAN remote configure
  • Support wireless OTA update firmware
  • AT Commands to change parameters
  • Downlink to change configure
  • IP66 Waterproof Enclosure
  • 8500mAh Li/SOCl2 Battery

Applications: 

应用场景

Specification:

Common DC Characteristics: 

  • Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
  • Operating Temperature: -40 ~ 85°C

Soil Moisture:

  • Range: 0-100.00 V/V %
  • Resolution: 0.01 V/V %
  • Accuracy: ±3% (0-53%)V/V %, ±5% (>53%) V/V %
  • Measure Method: FDR , with temperature &EC compensate 

Soil Temperature:

  • Range: -40.00℃～85.00℃
  • Resolution: 0.01℃
  • Accuracy: -10℃～50℃:<0.3℃ ,All other: <0.6℃
  • Measure Method: RTD, and calibrate

Soil Conductivity:

  • Range: 0-20000 uS/cm(25℃)(0-20.0EC)
  • Resolution: 1 uS/cm
  • Accuracy: 2%FS
  • Measure Method: Conductivity , with temperature compensate

LoRa Spec: 

  • Frequency Range,  Band 1 (HF): 862 ~ 1020 Mhz
  • Max +22 dBm constant RF output vs.
  • RX sensitivity: down to -139 dBm.
  • Excellent blocking immunity 

Battery:

  • Li/SOCI2 un-chargeable battery
  • Capacity: 8500mAh
  • Self-Discharge: <1% / Year @ 25°C
  • Max continuously current: 130mA
  • Max boost current: 2A, 1 second

Power Consumption: 

  • Sleep Mode: 5uA @ 3.3v
  • LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Document:

Package Includes:

  • SE0X-LB LoRaWAN Soil Moisture & EC Sensor Transmitter 

Dimension and weight:

  • Device Size:  mm
  • Device Weight:  g

Part Number: SE0X-LB-XX

The SE0X-LB model does not include probes. The probe (DR-SE-6P) needs to be purchased separately.

XX: the default frequency band 

  • EU433: Default frequency band EU433
  • CN470: Default frequency band CN470
  • EU868: Default frequency band EU868
  • IN865:  Default frequency band IN865
  • KR920: Default frequency band KR920
  • AS923: Default frequency band AS923
  • AU915: Default frequency band AU915
  • US915: Default frequency band US915


If you want to purchase the SE0X-LB, Please also remember to select the SE0X-LB probe (DR-SE-6P) in the frequency band selection. One SE0X-LB can connect 4pcs probe, so that you can purchase 4pcs probe when you order 1pcs SE0X-LB.




###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

View Write Review
$55.00
SN50v3-LB -- Waterproof Long Range Wireless LoRa Sensor Node (SN50v3-LB)

SN50V3-LB LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by 8500mA Li/SOCl2 battery for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

 

SN50V3-LB wireless part is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

 

SN50V3-LB has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.

 

SN50V3-LBhas a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.

 

SN50V3-LB is the 3rd generation of LSN50 series generic sensor node from Dragino. It is an open source project and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.

Features:

  • LoRaWAN 1.0.3 Class A
  • SX1262 LoRa Core
  • Ultra-low power consumption
  • Open-Source hardware/software
  • Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
  • Support Bluetooth v5.1 and LoRaWAN remote configure
  • Support wireless OTA update firmware
  • Uplink on periodically
  • Downlink to change configure
  • 8500mAh Battery for long term use
  • IP65 Water Proof
  • External LoRa Antenna

Applications: 

  • Wireless Alarm and Security Systems
  • Home and Building Automation
  • Automated Meter Reading
  • Industrial Monitoring and Control
  • Long range Irrigation Systems,etc.

Micro Controller:

  • MCU: 48Mhz ARM
  • Flash: 256KB
  • RAM: 64KB
  • Common DC Characteristics:
  • Supply Voltage: 2.5v ~ 3.6v
  • Operating Temperature: -40 ~ 85°C

LoRa Spec:

  • Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
  • Max +22 dBm constant RF output vs.
  • RX sensitivity: down to -139 dBm.
  • Excellent blocking immunity

I/O Spec (Multiplex Pins):

  • Battery output (2.6v ~ 3.6v depends on battery)
  • +5v controllable output
  • 3 x Interrupt or Digital IN/OUT pins
  • 3 x one-wire interfaces
  • 1 x UART Interface
  • 1 x I2C Interface

Battery:

  • Li/SOCI2 un-chargeable battery
  • Capacity: 8500mAh
  • Self-Discharge: <1% / Year @ 25°C
  • Max continuously current: 130mA
  • Max boost current: 2A, 1 second

Power Consumption:

  • Sleep Mode: 5uA @ 3.3v
  • LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Documents:

Package Includes:

  • 1 x SN50v3-LB module

Dimensions and Weight:

Device Size: 9.7 x 6.5 x 4.7 cm
Device Weight: 150g
Package Size / pcs : 14.0 x 8x 5 cm
Weight / pcs : 180g 

Order Info:

SN50v3-XX-YY:

XX: the default frequency band

  • EU433: Default frequency band EU433
  • CN470: Default frequency band CN470
  • EU868: Default frequency band EU868
  • IN865: Default frequency band IN865
  • KR920: Default frequency band KR920
  • AS923: Default frequency band AS923
  • AU915: Default frequency band AU915
  • US915: Default frequency band US915

YY:

  • NH: No Hole
  • 12: With M12 IP68 waterproof cable hole
  • 16: With M16 IP68 waterproof cable hole


Shipping Notice

- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

View Write Review
$46.00
SN50v3-LS -- Waterproof Long Range Wireless LoRa Sensor Node (SN50v3-LS)

SN50V3-LS LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by  8500mAh Li/SOCl2 battery  or solar powered + Li-ion battery for long term use.SN50V3-LB/LS is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

SN50V3-LS wireless part is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, and so on.

SN50V3-LS has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.

SN50V3-LS has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.

SN50V3-LS is the 3rd generation of LSN50 series generic sensor node from Dragino. It is an open source project and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.

Features:

  • LoRaWAN 1.0.3 Class A
  • SX1262 LoRa Core
  • Ultra-low power consumption
  • Open-Source hardware/software
  • Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
  • Support Bluetooth v5.1 and LoRaWAN remote configure
  • Support wireless OTA update firmware
  • Uplink on periodically
  • Downlink to change configure
  • 8500mAh Li/SOCl2 battery (SN50v3-LB)
  • Solar panel + 3000mAh Li-ion battery (SN50v3-LS)
  • IP65 Water Proof
  • External LoRa Antenna

Applications: 

  • Wireless Alarm and Security Systems
  • Home and Building Automation
  • Automated Meter Reading
  • Industrial Monitoring and Control
  • Long range Irrigation Systems,etc. 

Specifications:

Common DC Characteristics:

  • Supply Voltage: Built-in battery , 2.5v ~ 3.6v
  • Operating Temperature: -40 ~ 85°C

I/O Interface:

  • Battery output (2.6v ~ 3.6v depends on battery)
  • +5v controllable output
  • 3 x Interrupt or Digital IN/OUT pins
  • 3 x one-wire interfaces
  • 1 x UART Interface
  • 1 x I2C Interface

LoRa Spec:

  • Frequency Range,  Band 1 (HF): 862 ~ 1020 Mhz
  • Max +22 dBm constant RF output vs.
  • RX sensitivity: down to -139 dBm.
  • Excellent blocking immunity

Battery:

  • Li/SOCI2 un-chargeable battery
  • Capacity: 8500mAh
  • Self-Discharge: <1% / Year @ 25°C
  • Max continuously current: 130mA
  • Max boost current: 2A, 1 second

Power Consumption:

  • Sleep Mode: 5uA @ 3.3v
  • LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Documents:

Package Includes:

  • 1 x SN50v3-LS LoRaWAN Generic Node

Dimensions and Weight:

Device Size: 9.7 x 6.5 x 4.7 cm
Device Weight: 150g
Package Size / pcs : 14.0 x 8x 5 cm
Weight / pcs : 180g 

Order Info:

Part Number: SN50v3-LS-XX-YY

XX: the default frequency band

  • EU433: Default frequency band EU433
  • CN470: Default frequency band CN470
  • EU868: Default frequency band EU868
  • IN865:  Default frequency band IN865
  • KR920: Default frequency band KR920
  • AS923: Default frequency band AS923
  • AU915: Default frequency band AU915
  • US915: Default frequency band US915

YY:

  • NH: No Hole
  • 12: With M12 IP68 waterproof cable hole
  • 16: With M16 IP68 waterproof cable hole
  • 20: With M20 IP68 waterproof cable hole

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

View Write Review
$52.00
Per Page      121 - 123 of 123