Search

PG1302是一款多通道高性能发射器/接收器，设计用于在随机通道上使用随机扩展因子同时接收多个 LoRa 数据包。它的目标是在中央无线数据集中器和分布在很宽距离范围内的大量无线端点之间建立稳健的连接。      

PG1302 旨在与 Raspberry Pi 一起使用，以在中度干扰环境中构建每平方公里多达5000 个节点的智能计量固定网络和物联网应用程序。    

PG1302 与RPi3/4完全兼容 ，用户可以使用 Dragino 的预构建操作系统来设置并通过 Web UI 轻松使用模块。或者在现有操作系统中安装原始 lorawan 驱动程序。 

特征：

• 基于 Semtech SX1302 解决方案
• 支持树莓派 3B/3B+/4
• 高达 -140dBm 的灵敏度
• 支持3.3v和5v
• 迷你PCIe接口
• 支持树莓派的转换板

界面：

• LoRa 的 SPI 接口
• 1 个用于 LoRa 的 I-PEX
• 电源输入：5v，1A
• 工作温度：-40℃～80℃

文件：

• 数据表、文档库
  
• 用户手册 -- 在线最新
• 所有 Dragino 产品的共享文件夹

PG1302 套装包括：

• PG1302×1
• LoRa 天线 x 1

PG1302-PI 套装包括：

• PG1302×1
• LoRa 天线 x 1
• RPi3/4 转换器 PCB
• RPI 上的螺丝孔转换器 PCB

PG1302-PI 尺寸和重量： 

• 设备尺寸：18 x 8 x 4 厘米
• 重量：150克

PG1302-XX 或  PG1302-PI-XX（包括用于 RPI 3/4 的 RPi 转换板）

XX：默认频段

• 868 : 对于 EU868,IN865
• 470 : 对于 CN470
• 915 : 适用于 US915,AU915,AS923,KR920

价格不包括地方税和进口关税

The Dragino LHT65S-NIS is a Traceable Temperature Sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external NIST traceable probe which has a unique certificate from NIST Certificate Lab.

The LHT65S-NIS allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as medicine storage, hospital application, cold chain, food safety and so on.

LHT65S-NIS supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

LHT65S-NIS has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

LHT65S-NIS is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

Features: 

• LoRaWAN Class A protocol
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
• Built-in Temperature & Humidity sensor
• Unique NIST Certificate
• External NIST Traceable probe
• Tri-color LED to indicate status
• Datalog feature
• AT Commands to change parameters
• Remote configure parameters via LoRaWAN Downlink
• Firmware upgradable via program port
• Built-in 2400mAh battery used for up to 10 year*

Applications: 

• medicine storage
• hospital application
• cold chain
• food safety

specifications:

Built-in Temperature Sensor:

• Resolution: 0.01 °C
• Accuracy Tolerance : Typ ±0.3 °C
• Long Term Drift: < 0.02 °C/yr
• Operating Range: -40 ~ 80 °C

Built-in Humidity Sensor:

• Resolution: 0.04 %RH
• Accuracy Tolerance : Typ ±3 %RH
• Long Term Drift: < 0.25 RH/yr
• Operating Range: 0 ~ 96 %RH

External Probe :

• Unique NIST Certificate
• Traceable probe

Documents:

• DataSheet, Document Base,Certificate
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x LHT65N/S-NIS LoRaWAN NIST Traceable Temperature Sensor
• 1 x raceable Probe.
• 1 x External LoRa Antenna.

Dimension and weight:

• Device Size: 13.5 x 7 x 3 cm
• Weight: 105g

• Package Size: 14.5 x 8 x 5 cm
• Weight: 170g

Order Info:

Model: LHT65S-NIS-XX 

XX: The default frequency band 

• AS923: LoRaWAN AS923 band
• AU915: LoRaWAN AU915 band
• EU433: LoRaWAN EU433 band
• EU868: LoRaWAN EU868 band
• KR920: LoRaWAN KR920 band
• US915: LoRaWAN US915 band
• IN865:  LoRaWAN IN865 band
• CN470: LoRaWAN CN470 band

###**Shipping Notice**
- We only support express shipping because of the included battery
- Prices are exclusive of local taxes and import duties

WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time.

WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV & radiation.

WSS-03 is designed to support the Dragino Weather station solution.

Users only need to connect WSS-03 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload the environment CO2, PM2.5 and PM10 to the IoT Server via wireless LoRaWAN protocol.

Features:

• RS485 CO2, PM2.5, PM10 sensor
• NDIR to measure CO2 with Internal Temperature Compensation
• Laser Beam Scattering to PM2.5 and PM10

Applications: 

• Weather Station

Specifications:

• CO2 Range: 0～5000ppm, accuracy: ±3%F•S（25℃）
• CO2 resolution: 1ppm
• PM2.5/PM10 Range: 0～1000μg/m3 , accuracy ±3%F•S（25℃）
• PM2.5/PM10 resolution: 1μg/m3
• Input Power: DC 7 ~ 24v
• Preheat time: 3min
• Interface: RS485
• Working Temperature: CO2: 0℃～50℃; PM2.5/PM10: -30 ~ 50℃
• Working Humidity: PM2.5/PM10: 15～80%RH (no dewing); CO2: 0～95%RH
• Power Consumption: 50mA@ 12v.

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-03

Dimensions and Weight:

Device Size: 24 x 24 x 15 cm
Device Weight: 1248 g

Order Info:

WSS-03

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

WSS-06 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation.

The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance

WSS-06 is designed to support the Dragino Weather station solution.

Users only need to connect WSS-06 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Total Solar Radiation to the IoT Server via wireless LoRaWAN protocol.

Features:

• RS485 Total Solar Radiation sensor
• Measure Total Radiation between 0.3～3μm（300～3000nm）
• Measure Reflected Radiation if sense area towards ground.

Applications: 

• Weather Station

Specifications:

• Input Power: DC 5 ~ 24v
• Interface: RS485
• Detect spectrum: 0.3～3μm（300～3000nm）
• Measure strength range: 0～2000W/m2
• Resolution: 0.1W/m2
• Accuracy: ±3%
• Yearly Stability: ≤±2％
• Cosine response: ≤7％(@ Sun angle 10°)
• Temperature Effect: ±2％（－10℃～40℃）
• Working Temperature: -40℃～70℃
• Working Humidity: 10～90%RH
• Power Consumption: 4mA @ 12v

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-06

Dimensions and Weight: 

Device Size: 15 x 11 x 6 cm
Device Weight: 346.5 g 

Order Info:

WSS-06

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

WSC1-L is the main process unit in Dragino Weather Station solution.

WSCL-1 is an outdoor LoRaWAN RS485 end node. It is powered by external 12v solar power and has a built-in li-on backup battery.

WSC1-L reads values from various sensors and upload these sensor data to IoT server via LoRaWAN wireless protocol. WSC1-L is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.

Each WSC1-L is pre-load with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto-connect after power on.

Features:

• Wall Attachable.
• LoRaWAN v1.0.3 Class A protocol.
• RS485 / Modbus protocol
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
• AT Commands to change parameters
• Remote configure parameters via LoRaWAN Downlink
• Firmware upgradable via program port
• Powered by external 12v battery
• Back up rechargeable 1000mAh battery
• IP Rating: IP65
• Support default sensors or 3rd party RS485 sensors

 Applications: 

• Weather Station
• RS485 to LoRaWAN Converter

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSC1-L
• 1 x RS485 multi-channel Converter  

Dimensions and Weight: 

Device Size: 19.5 x 12 x 6 cm
Device Weight: 282 g

Order Info:

WSC1-L-XX:

XX: the default frequency band

• AS923: LoRaWAN AS923 band
• AU915: LoRaWAN AU915 band
• EU433: LoRaWAN EU433 band
• EU868: LoRaWAN EU868 band
• KR920: LoRaWAN KR920 band
• S915: LoRaWAN US915 band
• IN865: LoRaWAN IN865 band
  
• CN470: LoRaWAN CN470 band

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

WSS-07 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.

WSS-07 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light.

WSS-07 is designed to support the Dragino Weather station solution.

Users only need to connect WSS-07 RS485 interface to WSC1-L. The weather station main processor WSC1-L can detect and upload Photosynthetically Available Radiation to the IoT Server via wireless LoRaWAN protocol.

Features:

• PAR (Photosynthetically Available Radiation) sensor measure 400 ~ 700nm wavelength nature light’s Photosynthetically Available Radiation.

• When nature light shine on the sense area, it will generate a signal base on the incidence radiation strength.

Applications: 

• Weather Station

Specifications:

• Input Power: DC 5 ~ 24v
• Interface: RS485
• Response Spectrum: 400～700nm
• Measure range: 0～2500μmol/m2•s
• Resolution: 1μmol/m2•s
• Accuracy: ±2%
• Yearly Stability: ≤±2％
• Working Temperature: -30℃～75℃
• Working Humidity: 10～90%RH
• Power Consumption: 3mA @ 12v

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-07

Dimensions and Weight:  

Device Size: 15 x 11 x 6 cm
Device Weight: 338 g 

Order Info:

WSS-07

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by 4000mA or 8500mA Li/SOCl2 battery for long term use.LSN50 is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LSN50 wireless part is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

LSN50 MCU part uses STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency,a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPROM and 20 Kbytes of RAM) plus an extensive range of
enhanced I/Os and peripherals.

LSN50 is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid





Prices are exclusive of local taxes and import duties




development.

Features: 

• Power Input: 10 ~ 30VDC
• Max Power Consumption: 1.2W
• Wind Speed, Wind Direction, Temperature, Humidity, Air Pressure, Illumination, PM2.5, PM10
• Weather Station Sensor for WSC2-L 

Sensor Spec:

Wind Speed:

• Range: 0~60m/s
• Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed)
• Ultrasonic measurement,no start wind strength needed

Wind Direction:

• Range: 0~3599
• Accuracy: +3°
• Ultrasonic measurement,no start wind strength needed
• Built-in electronic compass. No need to consider installation direction

Temperature:

• Range: -40°C ~ +80°C
• Accuracy: +0.5°C

Humidity:

• Range: 0 ~ 99% RH
• Accuracy Tolerance : Typ +3% RH

Air Pressure:

• Accuracy: ±0.15kPa@25°C 101kPa
• Range: 0~120kPa

Noise:

• Range: 30dB~120dB
• Accuracy: +0.5dB

PM2.5:

• Range: 0~1000ug/m3
• Accuracy: ±3%FS
• Resolution: 1ug/m3

PM10:

• Range: 0~1000ug/m3
• Accuracy: +3%FS
• Resolution: 1ug/m3

llumination:

• Range: 0~200k Lux
• Accuracy: +7%(25 °C)

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• WSS-09 Weather Station Sensor 

Dimensions and Weight: 

• Device Size:  cm
• Device Weight:  g

WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. 

WSS-04 has auto heating feature, this ensures measurement more reliable.

WSS-04 is designed to support the Dragino Weather station solution.

Users only need to connect WSS-04 RS485 interface to WSC1-L. The weather station main

processor WSC1-L can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.

Features:

• RS485 Rain/Snow detect sensor
• Surface heating to dry
• grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion

Applications: 

• Weather Station

Specifications:

• Detect if there is rain or snow
• Input Power: DC 12 ~ 24v
• Interface: RS485
• Working Temperature: -30℃～70℃
• Working Humidity: 10～90%RH
• Power Consumption: No heating: 12mA @ 12v, heating: 94ma @ 12v.

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-04

Dimensions and Weight:

Device Size: 14.5 x 8 x 5 cm
Device Weight: 318 g

Order Info:

WSS-04

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

WSS-05 is designed to support the Dragino Weather station solution.

Users only need to connect WSS-05 RS485 interface to WSC1-L.The weather station main processor WSC1-L can detect and upload environment Temperature, Humidity, Illuminance, Pressure to the IoT Server via wireless LoRaWAN protocol.

Features:

• RS485 Temperature, Humidity, Illuminance, Pressure sensor

Applications:  

• Weather Station

Specifications:

• Input Power: DC 12 ~ 24v
• Interface: RS485
• Temperature Sensor Spec: Range: -30 ~ 70℃,resolution 0.1℃,Accuracy: ±0.5℃
• Humidity Sensor Spec: Range: 0 ~ 100% RH,resolution 0.1 %RH,Accuracy: 3% RH
• Pressure Sensor Spec: Range: 10～1100hPa,Resolution: 0.1hPa,Accuracy: ±0.1hPa
• Illuminate sensor: Range: 0～2/20/200kLux,Resolution: 10 Lux,Accuracy: ±3％FS
• Working Temperature: -30℃～70℃
• Working Humidity: 10～90%RH
• Power Consumption: 4mA @ 12v

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-05

Dimensions and Weight: 

Device Size: 20 x 20 x 15 cm
Device Weight: 950 g

Order Info:

WSS-05

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties

The Dragino LHT65N/S-NIS is a Traceable Temperature Sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external NIST traceable probe which has a unique certificate from NIST Certificate Lab.

The LHT65N/S-NIS allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as medicine storage, hospital application, cold chain, food safety and so on.

LHT65N/S-NIS supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

LHT65N/S-NIS has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

LHT65N/S-NIS is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

Features: 

• LoRaWAN Class A protocol
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
• Built-in Temperature & Humidity sensor
• Unique NIST Certificate
• External NIST Traceable probe
• Tri-color LED to indicate status
• Datalog feature
• AT Commands to change parameters
• Remote configure parameters via LoRaWAN Downlink
• Firmware upgradable via program port
• Built-in 2400mAh battery used for up to 10 year*

Applications: 

• medicine storage
• hospital application
• cold chain
• food safety 

• DataSheet, Document Base,Certificate
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x LHT65N/S-NIS LoRaWAN NIST Traceable Temperature Sensor
• 1 x raceable Probe.

Dimension and weight:

• Device Size: 13.5 x 7 x 3 cm
• Weight: 105g

• Package Size: 14.5 x 8 x 5 cm
• Weight: 170g 

Model: LHT65N-NIS-XX

XX: The default frequency band 

• AS923: LoRaWAN AS923 band
• AU915: LoRaWAN AU915 band
• EU433: LoRaWAN EU433 band
• EU868: LoRaWAN EU868 band
• KR920: LoRaWAN KR920 band
• US915: LoRaWAN US915 band
• IN865:  LoRaWAN IN865 band
• CN470: LoRaWAN CN470 band

Features:

• Optical Rain Guage for WSC2-L

Specifications:

• Input Power: 9~30 VDC
• Sense diameter: 6cm
• Pulse Output, each pulse , 0.1mm
• Max rain: 24mm/min
• Operation Temperature: -40 ~ 60 °C
• Operation Humidify: 0~99%RH(no dew)

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• WSS-08 Optical Range Guage

Dimensions and Weight: 

• Device Size:  cm
• Device Weight:  g

AIS01-LB is a LoRaWAN AI Image End Node. AIS01-LB has a camera and AI processor in the probe. It can take photo, analyze the photo to get digital reading and send the info to IoT server via LoRaWAN Network.

AIS01-LB is pre-trained to support image recognized of water meter, gas meter and power meter. It can be trained to support more image recognized for different application.

AIS01-LB can send the digital reading after recognized and it can also send the original photo via LoRaWAN as well.

AIS01-LB is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

When you plan to purchase the AIS01-LB, please remember to purchase the AUC USB TTL adapters(AUC) for AIS Sensors. You can find it via their frequency band for the AIS01-LB.

Features:

• LoRaWAN v1.0.3 Class A protocol
• Low power consumption
• AI Image Sensor
• Send image to IoT server
• Recognize digits from Image and send data to IoT server
• Trained for common reading for Water Meter, Gas Meter, Power Meter
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
• Support Interrupt uplink
• Support Bluetooth v5.1 and LoRaWAN remote configure
• Support wireless OTA update firmware
• AT Commands to change parameters
• Uplink on periodically
• Downlink to change configure
• 8500mAh Li/SOCl2 Battery

Applications: 

Specification:

Common DC Characteristics: 

• Supply Voltage: Built-in Battery , 2.5v ~ 3.6v
• Operating Temperature: -40 ~ 85°C

Image Sensor - Camera: 

• Mono: black & white
• Angle: 110°
• Image size:  64kb
• Image resolution:  640x480

LoRa Spec: 

• Frequency Range,  Band 1 (HF): 862 ~ 1020 Mhz
• Max +22 dBm constant RF output vs.
• RX sensitivity: down to -139 dBm.
• Excellent blocking immunity 

Battery:

• Li/SOCI2 un-chargeable battery
• Capacity: 8500mAh
• Self-Discharge: <1% / Year @ 25°C
• Max continuously current: 130mA
• Max boost current: 2A, 1 second

Power Consumption: 

• Sleep Mode: 5uA @ 3.3v
• LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Docuemnts:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• AIS01-LB LoRaWAN AI Image End Node

Dimension and weight:

• Device Size:  mm
• Device Weight:  g

Order Info:

Part Number: AIS01-LB-XX

 XX: the default frequency band 

• EU433: Default frequency band EU433
• CN470: Default frequency band CN470
• EU868: Default frequency band EU868
• IN865:  Default frequency band IN865
• KR920: Default frequency band KR920
• AS923: Default frequency band AS923
• AU915: Default frequency band AU915
• US915: Default frequency band US915

###**Shipping Notice**
- We only support express shipping because of the included battery
- Prices are exclusive of local taxes and import duties

WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall.

WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean.

WSS-01 is designed to auto support the Dragino Weather station solution. Users just need to connect WSS-01 RS485 interface to WSC1-L.

The weather station main processor WSC1-L can auto-detect and upload the rainfall to the LoRaWAN Server. The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user just needs to screw up and adjust the bottom horizontally.

WSS-01 package includes screw which can be installed to ground. If user want to install WSS-01 on pole, they can purchase WS-K2 bracket kit. 

Features:

• ABS enclosure.
• Vents under funnel, avoid leaf or other things to avoid rain flow.
• Small dimension, easy to install
• RS485 Rain Gauge

Applications: 

• Weather Station

Specifications:

• Resolution: 0.2mm
• Accuracy: ±Rainfall strength: 0mm～4mm/min (max 8mm/min)
• Input Power: DC 5~24v
• Interface: RS485
• Working Temperature: 0℃～70℃

Documents:

• DataSheet, Document Base
  
• User Manual -- Online Latest
• Shared Folder for all Dragino Products

Package Includes:

• 1 x WSS-01

Dimensions and Weight:

Device Size: 28 x 28 x 28 cm
Device Weight: 1395 g

Order Info:

Order Part:

• WSS-01 : Rain Gauge
• WS-K2 :  Bracket Kit for Pole installation

###**Shipping Notice**
- We only support express shipping because of included battery
- Prices are exclusive of local taxes and import duties